Bissell CrossWave Turbo vs SpinWave 2039A — Which Cleans Better?
Introduction
Choosing the right floor cleaner can make a big difference in how your home looks and feels — especially if you have kids, pets, or frequent spills. Two popular choices from Bissell are the CrossWave Turbo and the SpinWave 2039A. These machines both clean hard floors, but they work very differently. In this comparison, we look at how they clean, what surfaces they handle best, and which one gets better results overall so you can pick the right tool for your space cartflicks.
Key Difference: Vacuum + Mop vs Powered Mop
Bissell CrossWave Turbo
-
Combines vacuuming and mopping in one pass — meaning it sucks up dry dirt and mops wet messes at the same time.
-
Uses a multi‑surface brush roll and suction to lift debris and solution from floors.
-
Dual‑tank design keeps clean and dirty water separate for more hygienic cleaning.
-
Works on hard floors and area rugs (with specific settings).
Bissell SpinWave 2039A
-
A powered hard‑floor mop — it does not vacuum.
-
Rotating microfiber pads scrub messes and apply cleaning solution.
-
Single tank and pads gently polish floors.
-
Best suited for sealed hard surfaces only (like hardwood, tile, vinyl).
In short, CrossWave cleans and lifts debris using suction plus scrubbing, while SpinWave scrubs and mops without vacuuming.
Cleaning Power & Performance
Dry Dirt and Debris
CrossWave Turbo:
The integrated vacuum mode means the CrossWave can pick up crumbs, pet hair, and dry dirt before or while it mops — a big advantage if your floors often get dusty or messy.
This makes cleaning faster and more thorough in homes where you’re vacuuming and mopping in one go.
SpinWave 2039A:
The SpinWave does not vacuum, so it leaves dry debris — like crumbs, pet hair, or grit — behind. You’ll generally need to sweep or vacuum first before mopping so the rotating pads don’t just push dirt around.
Winner: CrossWave Turbo for messy homes, pets, frequent crumbs, or dust.
Wet Messes & Liquid Spills
CrossWave Turbo:
The rolling brush and solution spray work well to loosen and remove spills, sticky spots, and everyday stains on hard floors. The suction then pulls up dirty water efficiently, leaving floors less wet and faster to dry.
SpinWave 2039A:
The rotating pads do a good job polishing and scrubbing wet messes — especially on sealed wood and tile — but because there’s no suction, floors can remain wetter after cleaning, and heavier spills may require an extra pass.
Winner: CrossWave Turbo for households with frequent spills or wetter messes.
Everyday Dust & Light Cleaning
If most of your cleaning is about light dust, dust footprints, or quick surface wiping, the SpinWave still holds its own. Its gentle but effective rotating pads make floors look fresh with very minimal effort, and it’s quieter and lighter to operate than the CrossWave.
Winner: SpinWave 2039A if you want simple, lightweight daily care on hard floors.
Surface Compatibility & Versatility
CrossWave Turbo
Hard floors (tile, vinyl, sealed wood)
Area rugs and low‑pile carpeting
Mixed surfaces without switching tools
Ideal for homes with pets, kids, or large areas needing regular upkeep.
SpinWave 2039A
Hard floors only
Safe for delicate sealed surfaces because pads are gentle
Not suitable for area rugs, carpets, or absorbing debris without vacuuming first.
Winner: CrossWave Turbo for homes with multiple surface types.
Ease of Use & Maintenance
SpinWave 2039A
-
Light, quiet, and generally easier to push around.
-
Washable mop pads are reusable, which can save money.
-
Simple tank and fewer parts make clean‑up quick after each use.
CrossWave Turbo
-
More parts to clean — brush roll, filters, and dirty water tank need regular rinsing.
-
Heavier and louder because of the vacuum motor.
-
Dual‑tank system is more complex but also more effective.
Winner: SpinWave 2039A for simpler maintenance and everyday comfort.
Cost & Value
In general:
-
SpinWave 2039A is less expensive upfront and has lower ongoing costs since pads are washable and there’s no suction motor to maintain.
-
CrossWave Turbo costs more, but the added vacuum + mop combo and multi‑surface capability give you more cleaning power per pass.
Winner: SpinWave 2039A for budget‑friendly options, CrossWave Turbo for multi‑purpose cleaning value.
Final Verdict: Which Cleans Better?
For most households:
Bissell CrossWave Turbo wins if you want the most complete cleaning performance — vacuum + mop in one machine, stronger mess pickup, versatile surface use, and better handling of dry and wet dirt.
For smaller spaces or light day‑to‑day cleaning:
Bissell SpinWave 2039A is perfect if your floors stay relatively clean, you mop often, and you just want a lightweight powered mop without full vacuuming.
Tip: If your home has pets, frequent spills, or mixed flooring, the CrossWave Turbo usually gives deeper cleaning results. If you mainly want to refresh sealed floors daily with minimal fuss, the SpinWave may be better and more affordable.
Read More »
